 |
|
The plants are tested and CE marked to BSEN12566-3.
From October 2008 the Environment Agency & UK Trading Standards will have a preference to allow only the installation of sewage plants 6PE-50PE that have been tested to BSEN12566-3.
A standard of 20mg/litre BOD, 30mg/litre Suspended Solids and 20mg/litre Ammonia should be acceptable to be discharged directly into a watercourse.
The Marsh range of Uni:Sewage Treatment Plants 6-50PE has attained an industry leading pass result for BOD reduction of below 15mg/litre.
The plant is covered by the following product guarantees:
- Internal & External Structure- 25 years *
- Compressor Blower-2 years
- Ceramic Diffuser-5 years
- Jung Pump-2 years (for pumped outlets only).
All our plants now have compressor alarms fitted as standard, these will becoming mandatory in 2009. Normal inlet inverts are 500mm. Invert risers are available from 250mm to one metre as required.
(* installed to our Installator Manual instructions)
Uni:ENsign Sewage Treatment Plant Advantages
- Nationwide Distribution - 48-72 hours
- ISO 9001 : 2000 certified - Quality Assured
- Underground installation causes minimal visual impact
- Easy to install
- Gravity or pumped outlets
- Low maintenance costs
- Low running cost
- Easily de-sludged
- Quiet in operation
- pH performance tested
- 5mm wall thickness - the strongest GRP tank on the market
|
|
