Marsh Industries

Domestic Sewage Treatment Plants

The plants are tested and CE marked to BSEN12566-3: The Environment Agency & UK Trading Standards will only allow the installation of sewage plants 6PE-50PE that have been tested to BSEN12566-3.

A standard of 20mg/litre BOD, 30mg/litre Suspended Solids and 20mg/litre Ammonia should be acceptable to be discharged directly into a watercourse.

The Marsh range of Sewage Treatment Plants 6-50PE has attained industry leading test results

The plant is covered by the following product guarantees:

Internal & External Structure - 25 years *
Compressor Blower - 2 years
Ceramic Diffuser - 5 years
Jung Pump - 2 years (for pumped outlets only).

(* installed to our Installation Manual instructions)

All our plants now have compressor alarms fitted as standard, these will becoming mandatory in 2009. Normal inlet inverts are 500mm. Invert risers are available from 250mm to one metre as required.

Made For Domestic & Commercial Off Mains Drainage Designed & Tested To EN12566-3
The plant has low visual impact with unobtrusive lids. Normally only needs a granular surround.
The Self Aligning Low Profile Means Faster Installation And Negligible Visual Impact
Low Running Costs est. at £52 for a Six Person
Easy Access Integral separate de-sludge pipe
Almost Silent Running & Odour Free .
Manufactured In The United Kingdom & Is Backed With A 25 Year Structural Guarantee.
Invert Risers and Pumped Outlets Can Be Supplied For Deeper Drain Connections
Designed With Integral Recycling System That Makes It Ideal For Intermittent Use.
Approved For Discharging Into A Watercourse, Ditch Or Land Drainage Bed. Listed On The British Water Web Pages